sus Circulation Kiwi Fruit Durian Hot Air Dryer Machine Energy Saving

Hot Air Circulation Kiwi Fruit Durian Drying Tray Dryer Machine
 
Introduction
 
The hot air drying machineis mechanized and fully automatic, adapting to the needs of the development of modern society, and changing the traditional outdated drying method of artificially adding wood, adding coal, turning over, measuring temperature and measuring humidity, which is a good drying in the current market.The hot air drying heat pump machine uses a small amount of electric energy to make full use of the heat in the air to dry the material, and is an environmentally friendly low-energy device that emits no waste water.Purchasing and using hot air drying equipment is the best way to respond positively to global carbon reduction and low carbon environmental policies.

Compared with the traditional drying method, the hot air drying equipment has the following features
1. Use electronic temperature controller or digital display temperature controller to control temperature, and the temperature is accurate and reliable.
2, using tempered glass observation door, safe and reliable, easy to observe.
3, high temperature silicone rubber sealing strip, good sealing and thermal insulation performance, good anti-aging performance

Working principle

The working principle of the hot air dryer is to use the inverse Carnot principle, the refrigerant is compressed by the compressor, and becomes a high temperature and high pressure gas. The gas temperature can reach 100-110 °C, and the high temperature gas passes through the pipeline (copper pipe). Entering the heat exchanger (condenser), and then passing the fan, sending the heat generated by the heat exchanger (condenser) to the drying room to heat and dry the material, and evaporating the heated material in the drying room The dehumidifier is dehumidified or the dehumidifier is discharged to the drying room to achieve the purpose of drying.

Processing craft
 
1. When picking, choose a full fruit type, about 180 grams in weight, uniform in size, and close to eight or nine ripe fruits as raw materials for processing the candied fruit.

2. First, clean the kiwi fruit, and use a machine or a professional worker to peel off its rough peel. According to production needs, cut the fruit into about 0.6cm thin slices. The entire process can now also be completed by a dedicated assembly line machine operation, which improves the efficiency of the processing and the accuracy of the sectioning.

3. Shortly after the fruit is cut, the flesh is susceptible to oxidation and darkens. Therefore, when making dried kiwi fruit, it is necessary to pass a safe antioxidant treatment.

4. Put the kiwi fruit slices into the boiling water for about three minutes. After the boiling water is discharged, cool the water at room temperature again and drain the water, so that the fruit slices maintain a natural color.

5. After controlling the moisture, sugaring the kiwi slices. One layer of kiwi slices is covered with white granulated sugar, according to the ratio of 50% in the upper layer, 30% in the middle layer, and 20% in the lower layer. The time is about 15 hours. Collect the sugar solution and boil for 0.5h until the flesh appears translucent. Spread it evenly on a drying tray and prepare for drying.

6. The kiwi dryer includes a drying room, a hot air circulation device and an automatic dehumidification system. The temperature and humidity are operated by an intelligent control system. After the automatic drying mode is set, the kiwi slices are in a zero pollution drying room. Drying is appropriate, and then increase the temperature by five degrees on the original basis, continue to drain and dry until the dried fruit pieces will not stick, soft and hard, moderately elastic.

Details

 
 
Packaging & Shipping
 
Packing:
Inside: plastic bag for the machine.
Outside: wooden case (adopt the wooden case or wooden pellets depended on clients' requirement).
Transportation:
Shipping, train, express, or upon clients’ demands

 
Our service and customers
 

Before sale services:

1. Provide the free consultation of the equipment

2. Provide the standard device and the flow chart

3. According to the client’s special requirement, offering the reasonable plan and free design helping to select the equipment.

During sale services:
As your special requirements,we will arrange our professional engineers to negotiate with you ,when you visit our factory, our translators and engineers will accompany,you ca n consult them if any question.

After sale services:

1. Oversea install and debug the equipment.

2. Train the first-line operator.

3. Operation/ Service/ Maintenance Manual: Provided In English.

4. We will provide 1-2 engineer to the client's factory for the installation and teach your workers.

We exported the machines to many countries all around the world, such as Italy, German, Russia, Tukey, Australia etc.Allmost all the customers speak highly of our machines and service, and they continue to buy from us again and again.
 
FAQ
 
Q: How can I get the price?
A: We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please tell us in your email so that we will regard you inquiry priority.
Q: What about the Warranty?
A: We are committed to professional commissioning of each machine prior to delivery to ensure that the machine is best for you. And solemnly promise that you can guarantee the machine for one year, and provide the price of after-sales spare parts service for a long time.
Q: How can I get the sample to check your quality?
A: You can visit the factory, or we can provide you with pictures and videos of the products for you, we can also provide certificates.
  
Contact with us
 

Mr. Jack Bing

Cell phone: +8613589061075 (Whatspp and Wechat ID)

Email: sales03@joyangmachine.com